ST-85 Professional Slim Tilt and Leveling LED TV mount 40"- 85" FREE SHIPPING

Description Universal height adjustable (post Leveling) Super Slim, Adjustable Tilt PLASMA, LCD, LED mount up to 85" Super Slim/ Flush Adjustable Tilt and Leveling Plasma, LCD, LED TV Wall mount Solidmounts ST-85 wall mounts will work with most TV screen from 40" to 85". The super Flush Tilt design is easy to install. All necessary hardware is included for different wall types. Horizontal and vertical position adjustments allow perfect positioning of the screen regardless of the distance of wall studs. Plus you do not need to redo your install if you just need to level the TV just a bit. Post Level feature lets you adjust the mount with a few simple twist on the screw driver. KEY FEATURES: •Your screen will be only 1.65" from the wall •Adjustable Easy Tilt provides 0° to +12° angle of viewing •Leveling -post Install adjustment for the perfect leveling of TV •Fits most 37", 40", 42", 46", 50", 55", 58", 60", 65" Plasma •Fits most LED screens 40", 42", 46", 48", 49", 52", 60", 65", 70", 75", 78", 79", 85" •Supports up to 150 lbs •Solid heavy-gauge steel construction •Wide open Back Plate for all wire installations •Easy to install with 31" back plate to support up to 2 studs (most mounts are only 28") and center the screen •TV can slide left to right on the 31" back plate, allowing you to center the TV on the wall from 3" to 12" •Supports up to 28.5" (730mm H) x 19.5" (500mm V) TV back Hole pattern Compatibility: This universal wall-mount bracket is designed to fit flat-panel plasma and LED screens from 40" to 85". The TV can have a maximum weight of 150 pounds. Does not support older Pioneer 60" or older Panasonic 65" or 85" Plasma Does not support Vesa 800 Construction: The bracket is constructed of heavy-gauge steel. Uses 2mm steel. Very heavy duty mount. Security: The rails can be locked in position by 2 screws on the bottom of each rail. Preventing the Tv from accidental move or for security reasons. Mounting: The wall plate must be anchored directly to wall studs using the supplied lag bolts. The slots in the wall plate can accommodate a variety of stud spacing, allowing you to easily mount the TV to wall studs that are 16" or 24" on center. Once the wall plate is anchored to the wall studs and the TV rails (with the TV attached) are hooked onto the wall plate, the TV can slide left to right, allowing you to center the TV on the wall. After the TV is secured, it will be held approximately 1.65" from the wall. Post Install Leveling is obtained by adjusting some screws on each rail TV Hole patterns Supported: Horizontal 4" to 28.5" 100---730 mm Vertical 4" to 19.5" 100---500 mm WHAT'S IN THE PRODUCT'S BOX? •31" wide Back Wall plate •2 Tilt TV rails, 21" long each •All necessary Screws for Wood Stud installation •Manual